iwatcher GUARD

Security & Tracking Solution

i-Watcher™ Guard is a versatile Cellular based security system GSM/GPS and Immobilizing system provides theft deterrence by preventing unauthorized drivers from using the vehicle. The control unit provides on-line tracking capabilities for cars and trucks.

i-Watcher™ Guard solution comprises one or more wired or wireless miniature engine cut unit(s) that are operated with an illuminated keypad for driver identification. The engine blocker is an unobtrusive electric unit installed in the vehicle in such a way that it looks like an original part of the vehicle. Its primary goal is to prevent the engine from running if an unauthorized driver enters the wrong code.

Utilizes the Global Positioning System (GPS) to lock on vehicles coordinates and use the GSM cellular network for controlling and monitoring the vehicle status by SMS and GPRS communication channels.

The unit connected to a user friendly smartphone application, which enables to control the i-Watcher® remotely and to receive essential information and alerts from the vehicle.

The unit also incorporates flexible I/O signal.

Designed to meet strict automotive standards for durability, power consumption and temperatures.

The App. enable to get a control over the i-Watcher unit by mean of : real time vehicle location on On-Line Map ,getting alerts on over speeding, Tilt and Tow events, low battery and battery cut off status, prevent ignition back in case of theft attempt, Arms and Disarms the system, Ignition status(on/off) and vehicle status (driving, parking).


  • GSM Quad-Band: 850 / 900 / 1800 / 1900 MHz
  • GPRS class 10
  • Onboard GSM quad band printed antenna – 50 Ohm
  • Integrated SIM Card holder
  • 3G – optional


  • Internal GPS Module based on 56-channel (U-Blox)
  • Max 7 Engine
  • Accuracy GPS / GLONASS position of 2.5m CEP/4.0 m
  • SBAS 2.0 m CEP
  • Tracking: –162 dBm / –158 dBm
  • GPS-GLONASS Internal antenna


  • 4 digital inputs – 2 Active Low + 2 Active High.
  • 4 digital outputs
  • RS232 for maintenance
  • 2.4 GHz wireless communication

Electrical characteristics

  • Operating Voltage 12 – 24 V DC
  • RF receiver ON< 8.6mA
  • Standby mode < 4mA
  • Deep sleep mode < 2 mA
  • Backup battery – Li-ion 3.7 v/1000 mAh

Communication Modes

  • SMS/GPRS /RS232
  • Operation
  • Cellular application or SMS based communication.


  • Red indicator LED
  • Built in 3D G sensor


  • Over speeding
  • Tow and Tilt
  • Door status (vehicle applicable)
  • Battery cut-off and low level
  • Ignition state (ON/OFF)
  • Vehicle state (Arm , Disarm , Alarm , Driving )
  • Position + Last Time Stamp
  • Alerts can be sent up to 2 Cellular Phones

Controls by Application or SMS

  • Remote arm/disarm
  • Remote "prevent ignition back"
  • Remote siren activation
  • Get status

Operating temperature

  • (-30ºC to +85ºC)


  • Length 83 mm
  • Width 71 mm
  • Height 29 mm


  • 90 gr (without cable)


  • Nonflammable PC-ABS
  • IP-67 version – optional


  • Normal arm/disarm by original vehicle keys.
  • On dash Keypad + wired Cut off unit +
  • optional wireless Cut off unit.
  • Ability to locate your vehicle in real time on On-Line Map using Smartphone application or using the Fleet Management and Control Application (MABAT On-Line).
  • Ability to Arms and Disarms the vehicle security system remotely using the original car remote keys or with the smartphone application and keypad for driver identification.
  • The system features a valet mode for limited driving and auto/passive arming modes.
  • Provide alerts on theft attempt, over speeding, Towing, Tilt, low battery and battery cut off.
  • Allow to change the keypad code remotely by SMS or by the control center.
  • Prevent ignition back in case of theft attempt.
  • Characterized by low power consumption, long standby time with internal battery.
  • Incorporates multiple I/O interfaces for
  • monitoring and control.
  • FOTA (Firmware Over The Air) update capability.
  • GPRS or SMS communication.
  • Cellular Application.